A perfect pair of condenser for stereo miking!

Each of these Shure KSM141 microphones is a dual-pattern stereo microphone offering cardioid and omnidirectional polar patterns with the turn of a rotating mechanical switch. Other features include Shure's Class A transformerless preamp circuitry for transparency; extremely fast transient response with minimal distortion; a highly sensitive 2.5-micron gold-layered mylar diaphragm; and a switchable, 3-position low-frequency filter to limit unwanted background noise and proximity effect. The microphone can capture sounds between 20Hz and 20kHz. Switchable pad (15 or 25dB) permits miking of extremely high SPL sources such as guitar cabs and snare drums.

This pair includes 2 break-resistant mic clips, carrying case, and 2 Popper Stopper windscreens.

Shure KSM141 Dual Pattern Studio Condenser Mic Pair Features:

• Each mic
• A mechanical polar pattern switch for highly consistent cardioid and true omnidirectional polar patterns that provides flexibility in a wide variety of recording applications
• Ultrathin, 2.5 micron, 24 karat gold-layered, low-mass Mylar diaphragm for superior transient response
• Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response, no crossover distortion, and minimal harmonic and intermodulation distortion
• Premium electronic components, including gold-plated internal and external connectors
• Subsonic filter eliminates low frequency rumble (less than 17Hz) caused by mechanical vibration
• 3-position switchable pad (0dB, 15dB, and 25dB) for handling extremely high sound pressure levels (SPLs)
• 3-position switchable low-frequency filter to reduce background noise and counteract proximity effect
• Includes 2 KSM141, 2 stand adapters, 2 windscreens, A27M stereo microphone adapter, and carrying case

A great pair at a great price - add them to your mic locker today!

Shure KSM141 Dual Pattern Studio Condenser Mic Pair Specifications:

• Each mic
• Cartridge type: Electret condenser
• Frequency response: 20 to 20,000Hz
• Output impedance: 150 ohms (actual)
• Power requirements: 48 Vdc phantom, 4.7 mA
• Common mode rejection: >50dB, 50Hz to 20kHz
• Polarity: Positive pressure on front diaphragm produces positive voltage on output pin 2 relative to pin 3
• Polar patterns: Cardioid, Omnidirectional -37dBV/Pa
• Sensitivity (typical; at 1000Hz; 1 Pa = 94dB SPL):
• Self-noise (typical, equivalent SPL; A-weighted, IEC 651): 14dB
• Maximum SPL @ 1000Hz:
• 5000 ohms load: 134dB (159dB, -25 Pad)
• 2500 ohms load: 139dB (164dB, -25 Pad)
• 1000 ohms load: 134dB (159dB, -25 Pad)
• Output Clipping Level:
• 5000 ohms load: 15dBV
• 2500 ohms load: 9dBV
• 1000 ohms load: 3dBV
• Dynamic Range:
• 5000 ohms load: 131dB
• 2500 ohms load: 125dB
• 1000 ohms load: 120dB
• Signal-to-noise ratio: 80dB
• Weight: Net: 156 g (5.5 oz.)
• Switch:
• Attenuator:
• 0, 15, 25dB
• Low Frequency response: flat; -6dB/octave below 115Hz; -18dB/octave below 80Hz