A rugged condenser mic that transmits clear, full range vocals.

This Shure Wireless Microphone consists of the Shure ULX2 handheld transmitter fitted with the SM86 microphone capsule. The ULX2 features a 3-segment battery fuel gauge, backlit LCD shows group and channel, frequency and power settings, control lockout, 8 hour battery life, 300 ft (92 m) operating range. The SM86 is a rugged condenser microphone that features a tailored frequency response for clear reproduction of vocals. Built-in 3-point shock mount and 2-stage pop filter.

Shure ULX2/SM86 Wireless Handheld Transmitter Microphone Features:

• SM86 Vocal Microphone
• Cardioid, Condenser
• Frequency response: 50 to 18,000 Hz
• Rugged construction withstands the rigors of touring sound
  
  ULX2 Handheld Transmitter
• 8-9 Hour Battery Life
• Power: On/Off Switch, Battery
• LED-Green When ON, Red When Battery Low
• Three-segment Battery Power Icon
• PEAK Icon-Appears When Audio Signal Overloads
• Group/Channel Displays
• SET Button for Saving Settings
• Adjustable Audio Gain Control
• Input Attenuation Switch-Select 0dB for Voice/Low Output; 20dB for High Output
• 4-pin Mini Connector
• Battery Cover Unscrews to Expose Battery and Gain Control
• 9V Battery Included

A great mic and a great wireless system. Order today.

Shure ULX2/SM86 Wireless Handheld Transmitter Microphone Specifications:

• ULX2 Handheld Transmitter
• RF Carrier Frequency Range: 554.000 to 865.000 MHz
• Effective Range: 300 ft. (100 m) under optimal conditions (Actual working range depends on RF signal absorption, reflection, and interference)
• Audio Frequency Response: 25 to 15,000 Hz,(±2 dB
• (Overall system frequency response depends on the microphone element)
  
  Transmitter Input
• Input Configuration: Unbalanced, active
• Actual Impedance: 20 kohms
• Maximum Input Level: 10 Vp—p (12 dBV) for 1% THD at minimum gain setting using 1 kHz
• signal.
  
  Transmitter Output
• Actual Impedance: 50 Ohms
• Nominal Output Level: 20 mW
• Maximum Output Level: 30 mW
• Pin Assignments: Shell = Ground Center = Signal
• *Output Level: Microphone Level = Line Level — 20 dB
  
  Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output
• Transmitter Gain Adjustment Range: 25 dB
• Receiver Audio Output Level (±38 kHz deviation, 1 kHz tone)
• XLR connector (into 600 ohm load): +3.9 dBV (line), —17 dBV (mic); 1/4 inch connector (into 3000 ohm load): —2 dBV
• Modulation: ±38 kHz deviation compressor-expander system with pre- and de-emphasis.
• RF Power Output: 30 mW maximum
• Dynamic Range: >100 dB, A-weighted
• RF Sensitivity: 1.26 uV for 12 dB SINAD (typical)
• Image Rejection: 80 dB typical
• Spurious Rejection: 75 dB typical
• Ultimate Quieting (reference ±38 kHz deviation)
• >105 dB, A-weighted
• System Distortion (reference ±38 kHz deviation, 1 kHz modulation): 0.3% total harmonic distortion, typical
• Power Requirements: 9V alkaline battery; 8.4 V Nicad optional
• Battery Life: 8 to 9 hours (with 9V Duracell MN1604 alkaline battery)
• Operating Temperature Range: -20 degrees to 49 degrees C (—4 degrees to
• 120 degrees F) NOTE: Battery characteristics may limit this range.
• Overall Dimensions (Length x Diameter): 8.4 x 1.9 in. (213 x 49 mm )
• Net Weight: 8.8 oz. (251 g) without battery