Online Rock: Empowering Musicians  
OnlineRock Equipment Store  




View Previous Product in our Shure Store View Next Product in our Shure Store

Click here to buy Shure ULXS14/98 Clip-On Wireless Instrument System by Shure.
Shure


Availability: Click to check availability.
List Price: $949.00
Discount: 20%
Our Price: $759.00
At Musiciansfriend.com on December 02, 2010.

A pro-level system with the performance and features you need.

The Shure ULXULXS14/98 Standard Wireless Instrument System, includes WB98H/C Clip-On Cardioid Condenser Instrument Microphone, ULX1 Bodypack Transmitter, and ULXS4 Diversity Receiver.

WB98H/C Instrument Microphone The Shure WB98H/C is a premium cardioid condenser instrumental microphone that features transformerless preamplifier circuitry, which improves linearity across the full frequency range. The pickup pattern of the Beta 98H/C provides high gain-before-feedback and excellent rejection of unwanted noise.

Its high maximum sound pressure level (SPL) enables it to handle the extreme demands of brass, woodwind and percussion instruments. The WB98H/C easily clamps onto the bell of wind instruments or onto the rim of percussion instruments. The integrated gooseneck and ratcheting swivel joint allows the microphone to be easily positioned and secured in place, and an isolation shock-mount reduces the transmission of instrument 'key noise' and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances.

ULX1 Wireless Bodypack Transmitter The low-profile, highly durable body-pack ULX1 has all the characteristics to meet the demands of high performance. For use with headworn, lavalier and instrument microphones, as well as guitars and basses. Attaches to belt, waistband or guitar strap with clip for hands-free mobility.

Shure ULXS4 Standard Receiver The Shure ULXS4 Standard receiver offers an exceptional value in both performance and price, for both working musicians and sound installers. The feature set of the versatile ULXS4 receiver offers a direct path to full, clear audio signals, unencumbered and unattached.

Shure ULXS14/98 Clip-On Wireless Instrument System Features:

  • WB98H/C Instrument Microphone
  • Tailored frequency response for studio quality performance
  • Wide dynamic range for use in high SPL environments
  • Uniform supercardioid pattern for high gain before feedback and superior rejection of off-axis sound
  • Optional A98D drum mount is unobtrusive and versatile—allows precise positioning of the microphone while holding it firmly in place
  • Compact design reduces stage clutter
  • Detachable cable for easy storage
  • Interchangeable microphone cartridges with different polar patterns are available
  • Legendary Shure quality, ruggedness, and reliability

    ULX1 Wireless Bodypack Transmitter
  • Three-segment battery fuel gauge
  • Frequency and power lockout
  • Flexible 1/4 wave antenna
  • TA4F mini four-pin input connector
  • Backlit LCD display shows group and channel setting
  • Adustable audio gain control
  • Input attenuation switch (selects 0 dB or -20 dB attenuation)
  • PEAK icon appears when audio input overloads the transmitter
  • Power on/off switch
  • 8 hour battery life (9V battery)
  • 300 foot (100m) operating range

    ULXS4 Diversity Receiver
  • Automatic Frequency Selection with group scan function
  • Over 1400 selectable frequencies
  • 5-segment transmitted audio signal strength meter
  • RF indicator
  • 3-segment transmitter battery fuel gauge
  • Advanced multi-function LCD displays group and channel
  • Mic/Line switch
  • Remotable 1/2-wave antenna
  • XLR and 1/4-inch output
  • Rugged plastic chassis
  • 1/2 rack design

Enjoy wireless at its best. Order today.

Shure ULXS14/98 Clip-On Wireless Instrument System Specifications:

  • RF Carrier Frequency Range: 554.000 to 865.000 MHz (Available frequencies depend on the applicable regulations in the country where the system is
  • used). Refer to the frequency supplement supplied with the system.
  • Effective Range: 100 m (300 ft.) under optimal conditions (NOTE: Actual working range depends on RF signal absorption, reflection, and interference)
  • Audio Frequency Response: 25 to 15,000 Hz, (± 2 dB
  • NOTE: Overall system frequency response depends on the microphone element.

    ULX1 Transmitter Input
  • Connector: TA4F
  • Input Configuration: Unbalanced, active
  • Actual Impedance: 18 kohms with lavalier microphone; 1 Mohms with instrument cable
  • Maximum Input Level: 10 Vp—p (12 dBV) for 1% THD at minimum gain setting
  • using 1 kHz signal.
  • TA4F Connector Pin Assignments: Pin 1: Tied to Ground; Pin 2: Tied to +5 V; Pin 3: Tied to Audio; Pin 4: Tied thru 20kohms Resistor to Ground. (On instrument adapter cable, Pin 4 floats)
  • Voltage for Remote Power: +5 V supplied to microphone cartridge

    ULX1 Transmitter Output
  • Actual Impedance: 50 Ohms
  • Nominal Output Level: 20 mW
  • Maximum Output Level: 30 mW

    ULXS4 Receiver Input
  • Connector Type: Antenna - BNC; Power Input — IEC 320
  • Actual Impedance: Antenna 50 Ohms
  • Nominal Input Level: Antenna - —95 to —30 dBm; Power Input — 15 Vdc
  • Maximum Input Level: Antenna - +6 dBm (—20 dBm recommended); Power Input - 18 Vdc
  • Pin Assignments: Antenna Shell = Ground Center = Signal; Power Input - IEC Standard
  • Voltage for Remote Power: Antenna 12 Vdc, 150 mA maximum

    ULXS4 Receiver Output
  • Connector: High Z Audio; Low Z Audio*
  • Output Configuration: High Z Audio - Unbalanced (1/4 in.); Low Z Audio - Balanced (XLR)
  • Actual Impedance: High Z Audio - 3 kohms; Low Z Audio - 22 ohms
  • Pin Assignments: High Z Audio Tip = Hot Ring/ Sleeve = Gnd Low Z Audio 1 = Ground, 2 = Hot, 3 = Cold
  • Voltage/Current/PhantomPower Protection?: High Z Audio — Yes; Low Z Audio — Yes
  • Output Level: Microphone Level = Line Level — 20 dB

    Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive
  • voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output
  • Transmitter Gain Adjustment Range: 25 dB
  • Receiver Audio Output Level (± 38 kHz deviation, 1 kHz tone): XLR connector (into 600 ohm load): +3.9 dBV (line), —17 dBV (mic); 1/4 inch connector (into 3000 ohm load): —2 dBV
  • Modulation: ±38 kHz deviation compressor-expander system with pre- and de-emphasis.
  • RF Power Output: 30 mW maximum (ULX1)
  • Dynamic Range: >100 dB, A-weighted
  • RF Sensitivity: 1.26 uV for 12 dB SINAD (typical)
  • Image Rejection: 80 dB typical
  • Spurious Rejection: 75 dB typically
  • Ultimate Quieting (reference ±38 kHz deviation): >105 dB, A-weighted
  • System Distortion (reference ±38 kHz deviation, 1 kHz modulation): 0.3% total harmonic distortion, typical
  • Power Requirements: ULX1- 9V alkaline battery (8.4 V Nicad optional);
  • ULXS: 14 - 18 Vdc (negative ground), 550 mA
  • Battery Life: 8 to 9 hours (with 9V alkaline battery)
  • Operating Temperature Range: - 20 degrees to 49 degrees C (- 4 degrees to 120 degrees F) NOTE: Battery characteristics may limit this range.

    ULX1 Dimensions (H x W x D): 3.86 x 2.68 x 1.10 in. (96.5 x 67 x 26.7 mm)
  • ULX1 Net Weight: 79 g (2.8 oz.) without battery

    ULXS4 Dimensions (H x W x D): 1.72 x 8.56 x 6.52 in. (43 x 214 x 163 mm)
  • ULXS4 Net Weight: 2 lbs, 5 oz. (1,049 g)

    WB98H/C Instrument Microphone
  • Type Condenser: (electret bias)
  • Polar Pattern: Unidirectional (cardioid)
  • Frequency Response: 20 to 20,000 Hz
  • Output Impedance: 1200 Ohms
  • Output Level (0 dB = 1 volt per Pascal): Open Circuit Voltage —56.5 (1.5mV)
  • Output Clipping Level (at 1kHz, THD 1.0 k): -9 dBV (0.35 V)
  • Maximum SPL: 143.5 dB

AboutOnlineRock Records Press RoomContactAdvertisePrivacyShop