An EQ plug-in that gets the sound you want fast and easy
Go from shimmering bright to warm and wide with a twist of a knob! The Tonelux Tilt plug-in is a fast
and easy way of making a track sit better in a mix or make it sound "warmer" or "cooler". It's also perfect in a live situation
where you need to tweak the whole mix to adjust for ear fatigue.
The Tilt Plug-in is a joint development effort between
Tonelux designer Paul Wolff and Softube, bringing the famous Tonelux sound to the digital world. The innovative Tilt design
was first featured on the Tonelux MP1a discrete mic preamp module and has been a godsend for engineers and producers that
need to take control of their sound in a fast and effective manner.
The Tilt plug-in features not only the original
Tilt design but also adds a couple of new features. A special "Live" version of the Tilt plug-in is included which is optimized
for Digidesign VENUE and other live systems and contains features requested by live sound engineers. The Tilt also includes
modeling of the transformer found in the MP1a mic preamp. The transformer adds a subtle distortion for bass frequencies that
fattens up the low end of a track.
The Softube Tonelux Tilt plug-in is the first and only software recreation of the
Tilt that is officially endorsed by Tonelux.
One-knob EQ that rebalances the sound without changing the apparent volume of the material. Choose Tilt Mode for a filter
that either tilts the signal towards the bass (counter clock wise) or the treble.
Set it to Loud and the filter will
become a loudness filter that boosts both high and low frequencies, or cuts both.
The filter section with its two filters will further shape the sound or help you get rid of problematic frequencies in a track.
One high-pass filter and one low-pass filter make up the filter section.
The 12 dB/oct lets you use a sharper cut-off
for the low cut.
Depending on which version of the Tilt you're running, the ←Tilt or Tilt Live��', the knob in the output section will be either
a Gain control (Tilt) or a Boost
Ceiling control (Tilt Live).
In a live situation it is often necessary to adjust the audio spectrum without changing the maximum gain of the signal, for
example to avoid feedback. With the Live version, you can set the Boost Ceiling to achieve this.
With Boost Ceiling
set a 0, the output will never be louder than the input, and regardless of the settings the plug-in will only attenuate, never
If the Boost Ceiling is set at max (6+) it will behave just like the normal Tilt version and instead keep the
apparent volume at a constant level, regardless of the Tilt control setting.
Developed by Softube and Tonelux
The Tonelux Tilt plug-in was developed by Softube in co-operation with Paul Wolff and Tonelux.
The transformer distortion from the Tonelux MP1a mic preamp is of course included in the Tilt plug-in (except for the Tilt
Live version). The transformer adds a subtle distortion for bass frequencies which fattens up the low end of a track.
for Live and Real-Time Use
The Tilt Live was specially designed for live and real-time usage, making it even more CPU efficient than the already slim
Tilt plug-in. It is also available for zero-latency platforms such as the VENUE console and Pro Tools|HD
iLok USB key. The iLok is a hardware dongle, much like other dongles you might have received when you bought other software.
The difference is that the iLok dongle supports different products by different manufacturers, so that you will only need
one iLok instead of separate dongles for each manufacturer."
Softube Tonelux Tilt EQ Plug-in - Native Download Features:
- Created together with original Tonelux designer Paul Wolff.
- Famous Tonelux Tilt control from the MP1 mic pres.
- Loudness control: beef up or thin down your mix.
- High and Low Pass filters, with 12 dB/oct option.
- Modeled output transformer distortion.
- Tilt Live plug-in included, optimized for live sound engineers.
- Very CPU friendly
The fast way to tweak your sound - live or in the studio.
Softube Tonelux Tilt EQ Plug-in - Native Download Specifications:
- System requirements
- Mac OS X (10.4 or higher), Windows XP or higher
- S Mac: Intel
or PowerPC processor (G4 or higher), Windows: PIII or higher
- 512 MB RAM
- Any VST, AudioUnits or RTAS compatible
- iLok USB key and the latest Pace Interlok drivers