If you're looking for the perfect marriage of classic, vintage rock tones with modern features and
levels of gain, your search is over!
The Marshall Vintage Modern 2466 Tube Amp Head is an all-valve amplifier with a choice of two dynamic
ranges selectable by footswitch. The Low range equates equates to the performance you would come to expect from a stock vintage
Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating
those classic hard rock tones of the seventies. Add to this the ability to dynamically interface with your instrument's Volume
and Tone controls and the experience translates into a truly expressive and organic feel in performance.
Two frequency
selective Pre-amp Volumes (Gains) - Body and Detail - facilitate greater flexibility in tone shaping for individual guitars
and styles while the power amplifier is heavily influenced by the first Marshall amplifiers to be produced, with four KT66
output valves yielding that substantial, fat and smooth tone. A MID Boost switch on the front panel fattens the tone even
more while a traditional Marshall tone control circuit enables fine tuning of your sound.
A master volume has been
included in order to practically manage the output levels at all venues. This is implemented after the phase splitter in order
to fully exploit maximum preamp drive when the master is turned down low. A reverb level control mixes the on board plate
reverb with the direct signal to whatever degree the player chooses. The reverb can be toggled on and off via the footswitch.
Finally,
a series FX loop is provided for those players who wish to use outboard effects to further enhance their sound. Loop levels
of —10dB and +4dB can be controlled via a rear panel switch as well as the option to completely bypass this feature
if it is not required.
The cosmetics are also a carefully crafted hybrid of old and new styles — made even more
dramatic by the deep purple vinyl that covers the entire series.
Marshall Vintage Modern 2466 Tube Amp Head Features:
- 100-Watt valve head
- Valve compliment: 4 x ECC83 (12AX7s) in preamp, 4 x KT66 in power amp
- Master Volume with two Gain Controls — Detail (highs) & Body (lows)
- Two footswitchable Dynamic Ranges — Low & High
- Mid Boost switch
- Footswitchable Proprietary digital Plate Reverb
- Series FX loop with level switch and bypass
- Made in England
Order today with the assurance of our Dual Guarantees. You've gotta get the best deal going
and be totally satisfied or your money back!
Marshall Vintage Modern 2466 Tube Amp Head Specifications:
- Dimensions: 29-1/2" x 12" x 9" (750 x 310 x 230 mm)
- Weight: 49.6 lbs (22.5 kg)