|
|
|
|
|
Provides guitarists with 3-part vocal harmony and realtime pitch correction.
Let the Digitech Vocalist Live 3 triple your voice with warm, natural sounding harmonies to really connect
with an audience and capture their attention. The Live 3 vocal harmony processor automatically follows your vocals and chord
progression using patented musIQ technology no matter what you play. Just step on the footswitch while you're playing to fill
the room with pitch-perfect backup vocals. This Digitech effect pedal can even have the harmonies sound male or female, and
increase their human factor for an organic, realistic sound.
The Digitech Vocalist Live 3 vocal pedal also keeps your song right on target with built-in pitch correction and a variety
of useful and intuitive effects like warmth, compression, a noise gate, and a 2-band EQ. Add in reverb, delay, and a built-in
tuner, and singers have an indispensable tool that will have you turning heads and inspiring applause like never before.
musIQ
makes the Digitech Vocalist Live 3 vocal pedal easy to use
musIQ is a revolutionary technology that eliminates the need to program a song's key or changes to create accurate harmonies.
musIQ analyzes your lead vocals as well as the chords and notes played on a guitar in real time to automatically generate
perfect vocal harmonies. Simply plug into the Live 3, play your guitar, and sing. The musIQ technology will ensure the harmonies
are always right on.
DigiTech Vocalist Live 3 Vocal Harmony Processor Pedal Features:
- 2 voices of fully automatic harmony—just play naturally on your guitar and musIQ technology will ensure that the
harmony voices are always musically correct
- Gender controls for each harmony voice allow you to alter the character of the harmony voices
- Humanize control to adjust the style of the harmony voices from loose to tight
- Five Harmony Patches to save harmony settings, each with an A part and a B part to make onstage harmony changes easy
- Realtime Chromatic Pitch Correction
- Vocal Pre Effects: Warmth (tube preamp), Compressor, two-band
- EQ, Low Cut and Noise Gate
- Reverb with 3 different room sizes
- Delay with 5 delay settings
- Built-in guitar chorus effect
- Ability to mix the guitar and vocal signals to provide the acoustic guitar player with an easy way to connect straight
to the PA or a powered speaker
- Low noise microphone preamp
- 48V phantom power
- Guitar Ground Lift to eliminate any noise hum issues that may arise
- Built-in guitar tuner
- Balanced XLR stereo outputs
- Balanced Line Input for post processing recording applications
- 24-bit, 44.1 kHz audio quality
Sing and play guitar? This pedal will make you sound even better. Order today!
DigiTech Vocalist Live 3 Vocal Harmony Processor Pedal Specifications:
- Mic Preamp
- Connector: XLR balanced
- Input Sensitivity @ -3dBFS: -35dBu to +0dBu
- Equivalent Input Noise (EIN): -126dBu, 20Hz - 20kHz (A-Weighted)
- Input Impedance: 6 kOhnms Balanced
Line Input
- Connector: 1/4" TRS balanced/unbalanced
- Input Sensitivity @ -3dBFS: -20dBu to +15dBu
- Input Impedance: 23 kOhms balanced, 13 kOhms unbalanced
Guitar Input / Guitar Thru:
- Connectors: 1/4" unbalanced
- Impedance: 1 MOhm (input), 1 kOhms (thru)
Outputs
- Connectors: XLR balanced
- Output Level @ 0dBFS: -5.6dBu
- Output Impedance: 200 Ohms pseudo-balanced
Input (Line) to Output (Line) Performance
- Dynamic Range: 106dB, 20Hz-20kHz (A-Weighted)
- THD + Noise @ Min gain: 0.007% @ 1kHz
- Frequency Response @ Max gain: -3dB @ 30Hz and 21kHz
Analog to Digital Converter
- Resolution: 24 bits
- Sampling Rate: 44.1kHz
- Frequency Response: -3dB at 20Hz and 20kHz
- Dynamic Range: 114dB, A-weighted
- Crosstalk: -110dB @ 1kHz
Digital to Analog Converter
- Resolution: 24 bits
- Sampling Rate: 44.1kHz
- Frequency Response: 20Hz—20kHz, ±0.5dB
- Dynamic Range: 114dB, A-weighted
- Crosstalk: -100dB @ 1kHz
- Sample Rate: 44.1kHz Internal Clock
Power
- US and Canada: 120 VAC, 60Hz Adapter: PS0913B - 120
- Japan: 100 VAC, 50/60Hz Adapter: PS0913B - 100
- Europe: 230 VAC, 50Hz Adapter: PS0913B - 230
- UK: 240 VAC, 50Hz Adapter: PS0913B - 240
- Australia: 240 VAC, 50Hz Adapter: PS0913B - 240-AU
- AC Power Adapter Output: 9VAC, 1.3 A
- Power consumption: 8.1W
Product Dimensions
- 8.25"L x 8.25"W x 2.5"H
- 210 mm(L) x 210 mm(W) x 63.5 mm(H)
Weight
- 4.2 lb., 1.9 kg
|
|
|
|
|
|
|