The B.C. Rich Outlaw PX3T electric guitar features a bolt-on maple neck, 2 Rockfield Mafia humbucker pickups with coil tap, a basswood body with a deeply arched top, a rosewood fretboard with 24 jumbo frets, hollowpoint circle inlay, a Floyd Rose-licensed tremolo and two end of body strap buttons for a custom strap fit and instrument positioning.

Bolt-on Construction
The Outlaw PX3T guitar uses a classic Bolt-on construction. The maple neck is bolted on with 4 screws to the body. This construction offers some added flexibility in the instrument's adjustment and provides the option to change the neck in the future.

Rockfield Pickups - Mafia
Bridge Pickups
The use of a ceramic magnet gives any pickup extra power due to the increased magnetic field they provide. This feature makes the Mafia pickups produce a hotter and thicker tone that's really aggressive and full. The increased low end, thick mids and in your face highs is what rock and roll was built on! Balanced and full of sustain this pickup is a great representation of its namesake, a truly intimidating killer.

Neck Pickups
The neck version of the Mafia pickup is just as full sounding as the bridge position, without taking away from what has already been accomplished. Very minor modifications to the overall design and design concept of this pickup gives it punchy, bold tone with the same aggressive characteristics as the bridge version. A tad brighter with a little less output really takes this pickup into the smooth and warm realm of the tonal spectrum. All while maintaining that balanced bite and in your face aggressive tone that the mafia is known for!

Deep Arched Top
A deep arched top is used on the B.C. Rich Outlaw PX3T guitar. The deep arch is achieved by increasing the body center by approximately 5/8" and then gently sloping the arch toward the side of the instrument and leveling out just as the slope reaches the edge. A deep arch top when applied to a B.C. Rich shape gives an air of elegance and sophistication.

B.C. Rich Outlaw PX3T Electric Guitar Features:

• Construction: bolt on
• Body wood: basswood
• Body thickness: 45mm
• Top style: deep arched
  
  Headstock style: small traditional 3 to a side
• Headstock color: painted to match
• Tuners: B.C. Rich diecast
  
  Neck wood: maple
• Back of neck: satin natural
• Neck profile: thin
• Neck thickness at fret 1: 19mm
• Neck thickness at fret 12: 21mm
• Neck radius: 430mm
  
  Fretboard: rosewood
• Inlay: Hollowpoint circles
• Frets: 24 jumbo 2.7mm
• Factory strings: 9 - 46
• Scale: 25-1/2"
  
  Tailpiece type: Floyd Rose original tremolo
• Pickups: 2 black Rockfield Mafia humbuckers
• Controls: 1 volume, 1 three-way toggle and 1 tone (the tone knob is a push/pull that acts as a coil tap. It taps out the two outer coils of each pickup.)
• Hardware: black
• 2 end-of-body strap buttons for a custom strap fit and instrument positioning
• Finish: painted glossy

Call, click, fire! Order today.