Portable monitoring and USB audio interface in one!
Alesis M1 Active 320 powered monitor speakers make a lot of sense on your studio desktop and for field
recording and other traveling audio engineers. The Alesis monitors connect via USB to your laptop or computer for plug-and-play
listening. These compact speakers are equipped with I/O for connecting a keyboard, mic preamp, guitar effects, mixer, and
other audio components for easy computer recording.
M1 Active 320 monitor speakers deliver 16-bit/44.1-48kHz audio
quality through a USB 1.1 port-without the need for special drivers. A Bass Boost switch increases the low-end for monitoring
in big spaces. Besides the USB cable, the I/O includes quality 1/4" plugs and standard RCA jacks, a TRS headphone output,
two unbalanced 1/4" phone jacks inputs, a stereo 1/8" mini-jack input, and stereo RCA inputs. Another nice benefit is that
each monitor speaker is magnetically shielded, so you won't have to worry about placing them near TVs or computers.
Alesis M1 Active 320 USB Black Studio Monitor Pair Features:
- USB 1.1 audio interface
- 16-Bit/44.1-48 kHz recording and playback
- Pro-grade 1/4" plugs and standard RCA jacks
- TRS Headphone output
- Two unbalanced 1/4" phone jack inputs
- Stereo 1/8" TRS mini-jack input
- Stereo RCA inputs
- 1/8" TS output to passive speaker (cable included)
- Switchable power supply
- Magnetically shielded for placement near TV and computer monitors
Take your recording show on the road with this low-cost monitor pair and audio interface
setup.
Alesis M1 Active 320 USB Black Studio Monitor Pair Specifications:
- Woofer: 3" lightweight, magnetically-shielded
- Tweeter: 1" silk dome
- Frequency Response: 80Hz-20kHz
- Power: 10W per channel RMS
- Signal-to-Noise Ratio: 88dB weighted
- Digital Conversion: 16-bit delta sigma, 44.1kHz or 48kHz sampling rate
- Dimensions: 6"W x 5"H x 7.5"D (each)
- Weight: Just under 5lb. (each)