|
|
|
|
A digital signal processor designed specifically for in-ear personal monitor applications.
Designed to enhance the sonic quality of in-ear personal monitors and provide level protection, the
dbx IEM in-ear personal monitor processor features legendary dbx effects like 4-band stereo compression with gating and limiting,
PeakStop limiting, and 5-band parametric EQ, plus stereo adjust, dbx proprietary Type IV conversion system, and custom reverb
algorithms using industry-standard Lexicon technology. The intuitive front panel provides instant access to all effects within
the IEM at the push of a button, and a large custom display clearly shows all operational information.
dbx IEM In-Ear Personal Monitor System Processor Features:
- Industry-standard Lexicon reverb algorithms
- 48-bit internal signal path for increased headroom and low level resolution
- Type IV A/D conversion system with TSE
- 4-band stereo compressor and limiter with classic dbx compression
- 5-band EQ - hi and lo shelves, 3-band fully parametric
- PeakStop limiting
- Stereo adjust to control your stereo image
- 4-band crossover with variable slopes
A must-have for performers and engineers who use in-ear personal monitors and require the
highest possible fidelity and functionality. Order today!
dbx IEM In-Ear Personal Monitor System Processor Specifications:
- Inputs
- Connectors: female XLR and 1/4'' TRS (pin 2 and tip hot)
- Type: electronically balanced/unbalanced, RF filtered
- Impedance: balanced >18 kOhms, unbalanced >9 kOhms
- Max input level: +24dBu balanced or unbalanced
- CMRR: >40dB, typically >55dB at 1kHz
- Input gain range: -∞ to +16dB
- MIDI: 5-Pin DIN MIDI input jack
Outputs
- Connectors: male XLR and 1/4'' TRS (pin 2 and tip hot)
- Type: servo-balanced/unbalanced, RF filtered
- Impedance: balanced 120 ohms, unbalanced 60 ohms
- Maximum output level: >+21dBu balanced/unbalanced into 2kOhm or greater; >+20dBm balanced/unbalanced (into 600 ohms)
- Output gain range: -∞ to +16dB
- MIDI: 5-Pin DIN MIDI out/thru jack
- PC COMM: RS232
A-D System Performance
- A-D conversion: 24-bit, dbx Type IV conversion system
Converter Dynamic Range:
- 114dB typical, A-weighted, 22kHz bandwidth
- 112dB typical, unweighted, 22kHz bandwidth
Type IV Dynamic Range:
- Up to 127dB with transient material, A-weighted, 22kHz bandwidth
- Up to 125dB with transient material, unweighted, 22kHz bandwidth
- Typically 119dB with program material, A-weighted, 22kHz bandwidth
- Typically 117dB with program material, unweighted, 22kHz bandwidth
THD + Noise:
- 0.002% typical at +4dBu, 1 kHz, input gain at 0dB
Frequency Response:
- 20Hz to 20kHz, +0/-0.5dB
Interchannel Crosstalk:
- < -85dB at 1 kHz, input gain at 0dB
D-A System Performance
- D-A conversion: 24-bit
- Dynamic range: 115dB typical, A-weighted, 22kHz bandwidth
- 112dB typical, unweighted, 22kHz bandwidth
- THD + Noise: 0.002% typical at +4 dBu, 1 kHz, output gain at 0 dB
- Frequency response: 20Hz to 20kHz, +0/-0.5dB
- Interchannel crosstalk: < -85dB at 1kHz, output gain at 0dB
Power Supply
- Operating voltage: 100-240 VAC 50/60Hz
- Power consumption: 24W
Physical
- Dimensions: 19''W x 1.75''H x 10''D
- Weight: 7.14 lbs. (3.24kg)
|
|
|
|