Online Rock: Empowering Musicians  
OnlineRock Equipment Store  




View Previous Product in our Mixers Store View Next Product in our Mixers Store

Click here to buy TASCAM DM-3200 Digital Mixer by TASCAM.
TASCAM


Availability: In-Stock and Ready To Ship!
List Price: $3799.00
Discount: 31%
Our Price: $2609.10
At Musiciansfriend.com on December 03, 2010.

The ultimate 32-channel mixing console.

More channels. More inputs. The new TASCAM DM-3200 digital mixer has more of everything that made the DM-24 a pedigreed studio workhorse. Plus an improved physical interface with per-channel multi-function LED ring encoders, more comprehensive DAW control, vastly improved routing flexibility, easier and robust data backup/ restore, greatly expanded mix storage using compact flash media and much more.

The DM-3200 features 32 full-featured channels and 16 returns for a total of 48 channels at mixdown — even at its full 96kHz / 24-bit audio resolution. It has 4-band fully-parametric EQ and dynamics on every channel and two effects processors, each capable of running the built-in TC Works reverb processor. Surround mixing is available with up to 6.1-channel panning, and the optional IF-SM/DM expansion card adds surround monitoring and downmixing to the DM-3200.

The DM-3200 provides a new way to record with DAW recording software. With the addition of an optional expansion card, the IF-FW/DM FireWire interface, the DM-3200 becomes a 24-channel computer audio interface, making it a complete studio solution for professional DAW recording. Built-in HUI and Mackie Control emulation allows the console to function as a flexible control surface for workstation software. This gives you the best of both worlds — total control over your recording software transport and mixing capabilities with the cue mixing, talkback, microphone preamps and world-class automation provided by the DM-3200.

TASCAM DM-3200 Digital Mixer Features:

  • 32 channels and 16 auxiliary returns for 48 total inputs
  • 16 buses — configurable as two 6.1 surround sends
  • 8 Aux Sends
  • 16 analog mic/line inputs with phantom power for condenser mics, analog inserts and -20dB pad switch
  • 24 channels of TDIF and 8 channels of ADAT built in
  • 2 expansion card slots support optional FireWire, ADAT, AES/EBU, Analog & TDIF cards
  • Dedicated cascade port supports cascade of two DM-3200s
  • Per channel LED ring encoders for pan, aux sends and EQ
  • Built-in DAW control
  • All inputs, effects and processing are available at 96k - no features are sacrificed at full sampling rate
  • Transport controls control DAW, HDR or tape playback
  • Dedicated DAW control surface layer for Digidesign Pro Tools®, Cakewalk SONAR®, MOTU DP™, Apple Logic, Steinberg Cubase® and Nuendo®
  • Powerful automation with touch-sensitive motorized faders
  • 4-band parametric EQ and dynamics on each channel
  • 32-bit internal resolution with 64-bit EQ resolution
  • Two built-in effects processors include TC Works reverb processing
  • Flexible routing — route from virtually any input to any output
  • Back up mix data to convenient Compact Flash media slot or to USB
  • Optional MU-1000 meter bridge
  • Stylish, professional design with rear panel I/O connections
  • TASCAM Mixer Companion software (Win XP/OSX) with:
  • Driverless USB connection to computer
  • Backup/restore data via USB
  • On screen timecode, transport and meter displays
  • Maximum overall dimensions (w x d x h): 27.6" x 32.9" x 9.1"_(700mm x 836mm x 230mm)
  • Weight 52.8lbs (24kg

TASCAM DM-3200 Digital Mixer Includes:

  • Supplied accessories Power cord, Quick Reference guide, 32 MB CF memory card, USB cable,
  • CD-ROM, warranty card

Order this advanced mixer with the assurance of our Dual Guarantees. You've gotta love it or your money back!

TASCAM DM-3200 Digital Mixer Specifications:

  • Analog audio I/O

    All specifications are given with the factory reference
  • level of —16 dBFS.

    MIC inputs (channels 1 through 16) balanced XLR-type female connectors
  • adjustable input level: (—60 dBu (TRIM max) to —4 dBu (0 dB pad))
  • (—40 dBu (TRIM max) to +16 dBu (—20 dB pad))
  • Input impedance 2.2k Ohms
  • PHANTOM (+48V) +48 V phantom power. Switchable in blocks of 4 channels
  • (1—4, 5—8, 9—12, 13—16)
  • LINE IN (BAL) inputs (channels 1 through 16) balanced 1/4" jacksb
  • adjustable input level (—44 dBu (TRIM max) to +12 dBu (TRIM min))
  • Input impedance 10k Ohms
  • INSERT connections (channels 1 through 16)od 1/4" TRS jacksc
  • Send: nominal output level —2dBu, maximum output level +14 dBu,
  • impedance 100 Ohms
  • Return: nominal input level —2dBu, headroom 16 dB, impedance 10 kohms
  • ASSIGNABLE RETURNS (BAL) (1 through 4) Balanced 1/4" jacks
  • Nominal input level: +4 dBu
  • Headroom: 16 dB
  • Input impedance: 5k Ohms
  • ASSIGNABLE SENDS (1 through 4) Pseudo-balanced 1/4" jacks
  • Nominal output level: —2 dBu
  • Maximum output level: +14 dBu
  • Output impedance: 100 Ohms
  • 2 TR IN (L/R) 2 x RCA pin jacks
  • Nominal input level —10 dBV
  • Headroom: 16 dB
  • Input impedance: 10 k Oms
  • STEREO OUTPUT (L/R) Balanced XLR-type male connectors
  • Nominal output level: +4 dBu
  • Maximum output level: +20 dBu
  • Output impedance: 100 Ohms
  • MONITOR OUTPUTS (CR (BAL)) Pseudo-balanced 1/4" jacks
  • Nominal output level: +4 dBu
  • Maximum output level: +20 dBu
  • Output impedance: 100 Ohms
  • MONITOR OUTPUTS (STUDIO) RCA pin jacks
  • Nominal output level —10 dBV
  • Maximum output level: +6 dBV
  • Output impedance: 100 Ohms
  • PHONES 2 x 1/4" stereo jacks
  • 50 mW + 50 mW total
  • 32 Ohms

    a. all XLR-type connectors are wired 1=ground, 2="hot", 3="cold"
  • b. all balanced 1/4" jacks are wired sleeve=ground, ring=cold, tip=hot
  • c. all TRS 1/4" jacks are wired sleeve=ground, ring=return, tip=send
  • d. Maximum with both PHONES jacks driven at maximum

    Digital audio I/O
  • DIGITAL INPUTS (1, 2) 2 x XLR-type female connectors (input impedance 110 Ohms) or
  • 2 x RCA pin jacks (input impedance 75 Ohms) (selectable)
  • AES3-1992 or IEC60958 data format (automatically detected)
  • 24-bit word length
  • Switchable sampling frequency conversion available
  • DIGITAL OUTPUTS (1, 2) 2 x XLR-type male connectors (output impedance 110 Ohms)
  • 2 x RCA pin jacks (output impedance 75 Ohms)
  • AES3-1992 or IEC60958 data format (software selectable)
  • 24-bit word length
  • TDIF-1(1, 2, 3) 3 x 25-pin (female) D-sub connectors (metric lock screws)
  • Conform to TDIF-1 standard
  • 24-bit word length
  • ADAT IN/OUT 2 x "Lightpipe" optical connectors
  • Conform to ADAT OPTICAL specifications
  • 24-bit word length
  • Sampling frequencies Internal 44.1 kHz/48 kHz, 88.2 kHz/96 kHz (high sampling frequencies)
  • External ±6.0%
  • Signal delay < 1.7 ms — Fs = 48 kHz, LINE IN to STEREO OUTPUT
  • < 0.85 ms — Fs = 96 kHz, LINE IN to STEREO OUTPUT

    Miscellaneous I/O connections
  • WORD SYNC IN BNC connector
  • Switchable 75 Ohms termination
  • TTL level
  • WORD SYNC OUT/THRU BNC connector
  • Switchable between through and output
  • TTL level
  • MIDI IN, OUT, THRU/MTC OUT 3 x 5-pin DIN connectors—conform to MIDI specifications
  • USB USB 1.1 'B' type connector (12 Mbps)
  • TIME CODE IN RCA pin jack
  • Conforms to SMPTE specifications
  • FOOT SW 1/4" mono jack
  • TO METER 25-pin female D-sub connector (non-metric lock screws)
  • For use with the optional MU-1000
  • RS-422 (for Sony 9-pin) 9-pin female D-sub connector (non-metric lock screws)
  • wired to RS-422 standards
  • GPI (for Machine start) 9-pin female D-sub connector (non-metric lock screws) wired for GPI control
  • Pin 1=GP11, Pin 2=GPI2, Pin 3=GPI3, Pin 4=GPI4, Pin 5=GND, Pin
  • 6=GPI5, Pin 7=GPI6, Pin 8=GPI7, Pin 9=GP18

    Specifications : Equalization
  • Equalization
  • All filters are fitted with "gain flat" switches
  • System performance
  • Physical characteristics
  • EQ switch On/Off
  • HIGH filter Gain: ±18 dB, 0.5 dB resolution
  • Frequency: 31 Hz to 19 kHz
  • Q: 0.27 to 8.65
  • Type: Hi-shelving, Peak, LPF
  • HI MID filter Gain: ±18 dB, 0.5 dB resolution
  • Frequency: 31 Hz to 19 kHz
  • Q: 0.27 to 8.65
  • Type: Peak, Notch
  • LO MID filter Gain: ±18 dB, 0.5 dB resolution
  • Frequency: 31 Hz to 19 kHz
  • Q: 0.27 to 8.65
  • Type: Peak, Notch
  • LOW filter Gain: ±18 dB, 0.5 dB resolution
  • Frequency: 31 Hz to 19 kHz
  • Q: 0.27 to 8.65
  • Type Low-shelving, Peak, HPF
  • THD (maximum level,
  • 1 kHz, TRIM: minimum)
  • 20 Hz — 22 kHz LINE IN to INSERT SEND
  • LINE IN to STEREO OUTPUT
  • < 0.005%
  • < 0.008%
  • Frequency response
  • (nominal level, 1 kHz,
  • TRIM: minimum)
  • 0.5dB/-1.0dB MIC/LINE to INSERT SEND
  • 0.5dB/-1.5dB MIC/LINE to INSERT SEND
  • 0.5dB/-1.0dB MIC/LINE to STEREO OUTPUTa
  • 0.5dB/-1.5dB MIC/LINE to STEREO OUTPUTa
  • a. MIC/LINE to channel module to STEREO OUTPUT, channel and stereo faders at 0 dB, pan hard left or hard
  • right
  • 20 Hz — 20 kHz (44.1/48 kHz)
  • 20 Hz — 40 kHz (88.2/96 kHz)
  • 20 Hz — 20 kHz (44.1/48 kHz)
  • 20 Hz — 40 kHz (88.2/96 kHz)
  • Noise level (20 Hz —
  • 22 kHz, TRIM: max,
  • 150 ohms)
  • MIC in (PAD off) to INSERT SEND (A weight)
  • STEREO OUT (Input no assign)
  • ASSIGNABLE RETURN to ASSIGNABLE SEND
  • 2TR IN to CR OUTPUT (CR: max, 0dB)
  • 2TR IN to STUDIO OUT (STUDIO OUT 0dB)
  • < —128 dBu (EIN)
  • < —83 dBu
  • < —85 dBu
  • < —78 dBu
  • < —88 dBu
  • Crosstalk @ 1 kHz STEREO/BUSS/AUX OUTPUTS
  • MONITOR OUTPUTS
  • > 90 dB
  • > 90 dB
  • Displays Backlit 320 x 240 LCD with contrast control
  • 2 x 12-segment LED meters
  • Faders 17 x 100 mm stroke, motor-driven touch-sensitive faders
  • Maximum overall dimensions (w x d x h) including rest 700 x 824 x 230 (mm) 27.6 x 32.4 x 9.1 (in)
  • Weight 24 kg (52.8 lbs)
  • Voltage requirements 120 VAC, 60 Hz
  • 230 VAC, 50 Hz
  • 240 VAC, 50 Hz
  • Power consumption 65 W
  • Supplied accessories Power cord, Quick Reference guide, 32 MB CF memory card, USB cable,
  • CD-ROM, warranty card

AboutOnlineRock Records Press RoomContactAdvertisePrivacyShop