|
|
|
|
Digital version of the TLM 103 with built-in A/D and easy S/PDIF digital connection.
The Solution D Mic Starter Set S/PDIF includes a Neumann TLM 103 D microphone and a S/PDIF onnection
kit. This setup gives you an price friendly entry into the world of digital microphones. The starter kit permits easy connection
of a Neumann TLM 103 D microphone to the widely used S/PDIF interfaces. All standard sampling frequencies are supported, from
44.1 kHz to 192 kHz.
For those budgeting for future purchases of recording equipment, an A/D converter is already integrated
into this Neumann digital microphone system, and a preamplifier is not required. Another advantage is the elimination of compatibility
considerations. All of the components are available from a single source, so that the Neumann microphone sound can be captured
on your digital recording medium with no coloration.
ThIs Neumann system can be expanded at any time by acquiring a
separate Neumann DMI-2 and the RCS remote control software to take advantage of additional switchable parameters and remotely
controlled functions.
TLM 103 D digital large-diaphragm microphone
The TLM 103 D, available immediately, is the digital version of a classicNeumann mic for use in home recording and project
studios.
In the microphone, the Neumann A/D converter which has been extensively proven in the D-01 receives the output
signal directly from the capsule. With a dynamic range exceeding that of the capsule, the converter permits optimal utilization
of the capsule qualities. This ensures that the capsule signal is made available to the recording system without any coloration,
with a hitherto unknown transparency.
If required, the DSP functions integrated into the microphone can be configured
and controlled remotely via the DMI-2 digital microphone interface and the RCS remote control software. These functions include
gain setting, a compressor/limter with an additional de-esser function, and a peak limiter. The digital concept proves particularly
beneficial here. The peak limiter, which receives the output signal almost directly from the capsule, acts as an automatic
"safety valve", permitting safe exploitation of the entire available dynamic range even in stressful recording situations.
For
the purpose of clear identification, information concerning the name of the manufacturer, model, serial number and installed
software version is transmitted by the microphones to the connected receiver.
The microphone is equipped with a 3-pin
XLR connector for transmission of a bi-directional signal conforming to the AES 42 standard. This signal includes the balanced
digital microphone output signal, the phantom power supply, and a remote control data stream that also contains a signal for
synchronizing the microphone with a master clock.
Suggested applications:
•A universal cardioid mic
•Vocalist recording
•Announcer's mic for broadcasting/voice over
•Due to minimal self-noise: on-air mic for radio/broadcast, very low
•amplitude signals, radio drama, sampling, foley/sound effects
•Home recording and project studios
•Spot mic for: wind instruments, strings, percussion, guitar amps, drum overhead
Neumann Solution D TLM 103 D Mic Starter Set with S/PDIF Interfacen - 44.1/48kHz Features:
- Legendary Neumann sound in the digital realm.
- Uncolored sound reproduction, with no "bottlenecks" between the capsule and the recording system.
- Neumann A/D converters
- Anti-clipping processing ensures handling safety, and reduces stress.
- Reduced time requirements and personnel costs, particularly due to faster post production processing.
- Lower investment costs, since separate A/D converters and preamps are no longer needed. This also means space and weight
savings (e.g. in the OB van).
Enjoy Neumann sound direct to disk and save on future investments — no additional
A-D or preamp required.
Neumann Solution D TLM 103 D Mic Starter Set with S/PDIF Interfacen - 44.1/48kHz
Specifications:
- TLM 103 D Microphone
- Acoustic transducer: Pressure gradient transducer
- Directional characteristic: Cardioid
- Frequency response: 20 Hz to 20 kHz
- Free-field sensitivity2):—39 dBFS
- Equivalent noise level, CCIR4): 17.5 dB
- Equivalent noise level, A-weighted4): 7 dB-A
- Signal-to-noise ratio3), CCIR4): 76.5 dB
- Signal-to-noise ratio3), A-weighted4): 87 dB
- Maximum SPL at 0 dBFS: 127 dBSPL
- Dynamic range, A-weighted4): 127 dB
- Sampling rates: 44.1/48/88.2/96/176.4/192 kHz
- Preset Gain: 10 dB (variable with DMI-2)
- Weight: approx. 1 Lb., 460 g
- Diameter: 2.36", 60 mm
- Length: 4.72", 132 mm
Connection Kit S/PDIF Specifications
- Connector: input XLR3F, output Cinch (XLR3M)
- Weight: approx. 0.21 Lb., 96 g
- Width: .90 ", 32 mm
- Height: 1.02", 26 mm
- Length: 4.13", 105 mm
|
|
|
|