|
|
|
|
|
Digital version of the TLM 103 with built-in A/D and easy AES/EBU digital connection.
The Neumann Solution D Microphone Starter Set S/PDIF is a TLM 103 D microphone and a AES/EBU connection
kit. This Neumann-based mic set gives you an economically attractive entry into the world of digital microphones. The starter
kit permits easy connection of a Neumann TLM 103 microphone to the widely used AES/EBU audio interfaces. The kit supports
all standard sampling frequencies from 44.1 kHz to 192 kHz.
For those budgeting for future purchases of recording equipment
an A/D converter is already integrated into this Neumann digital microphone system, and a preamplifier is not required. Another
advantage to this kit is the elimination of compatibility considerations. All of the components are available from a single
source, so that the Neumann microphone sound can be captured on your digital recording medium with no coloration.
ThIs
system can be expanded at any time by acquiring a separate Neumann DMI-2 and the RCS remote control software to take advantage
of additional switchable parameters and remotely controlled functions.
TLM 103 D digital large-diaphragm microphone
The TLM 103 D microphone is the digital version of a classic Neumann mic for home recording and project studios.
In
TLM 103 D microphone, the Neumann A/D converter receives the output signal directly from the mic capsule. With a dynamic range
exceeding that of the capsule, the converter permits optimal utilization of the capsule's qualities. This ensures that the
mic capsule signal is available to your recording system without any coloration, and with excellent transparency.
If
required, the DSP functions integrated into the microphone can be configured and controlled remotely via the DMI-2 digital
microphone interface and the RCS remote control software. These functions include gain setting, a compressor/limter with an
additional de-esser function, and a peak limiter. The digital concept proves particularly beneficial here. The peak limiter,
which receives the output signal almost directly from the capsule, acts as an automatic "safety valve", permitting safe exploitation
of the entire available dynamic range even in stressful recording situations.
For the purpose of clear identification,
information concerning the name of the manufacturer, model, serial number and installed software version is transmitted by
the microphones to the connected receiver.
The microphone is equipped with a 3-pin XLR connector for transmission of
a bi-directional signal conforming to the AES 42 standard. This signal includes the balanced digital microphone output signal,
the phantom power supply, and a remote control data stream that also contains a signal for synchronizing the microphone with
a master clock.
Neumann Solution D TLM 103 D Microphone Starter Set With AES/EBU Interface - 44.1/48kHz Features:
- Legendary Neumann sound in the digital realm.
- Uncolored sound reproduction, with no "bottlenecks" between the capsule and the recording system.
- Neumann A/D converters
- Anti-clipping processing ensures handling safety, and reduces stress.
- Reduced time requirements and personnel costs, particularly due to faster post production processing.
- Lower investment costs, since separate A/D converters and preamps are no longer needed. This also means space and weight
savings (e.g. in the OB van).
Go pure Neumann sound all the way from source to DAW at up to 192kHz and save money too
— no additional A-D or preamp needed!
Neumann Solution D TLM 103 D Microphone Starter Set With AES/EBU Interface - 44.1/48kHz
Specifications:
- TLM 103 D Microphone
- Acoustic transducer: Pressure gradient transducer
- Directional characteristic: Cardioid
- Frequency response: 20 Hz to 20 kHz
- Free-field sensitivity2):—39 dBFS
- Equivalent noise level, CCIR4): 17.5 dB
- Equivalent noise level, A-weighted4): 7 dB-A
- Signal-to-noise ratio3), CCIR4): 76.5 dB
- Signal-to-noise ratio3), A-weighted4): 87 dB
- Maximum SPL at 0 dBFS: 127 dBSPL
- Dynamic range, A-weighted4): 127 dB
- Sampling rates: 44.1/48/88.2/96/176.4/192 kHz
- Preset Gain: 10 dB (variable with DMI-2)
- Weight: approx. 1 Lb., 460 g
- Diameter: 2.36", 60 mm
- Length: 4.72", 132 mm
Connection Kit AES/EBU Specifications
- Connector: input XLR3F, output Cinch (XLR3M)
- Weight: approx. 0.28 Lb., 130 g
- Width: .90 ", 32 mm
- Height: 1.02", 26 mm
- Length: 4.13", 105 mm
|
|
|
|
|
|
|