|
|
 |
|
 |
|
Powerful, lightweight, and reliable.
The JBL EON515 is a 15-inch, two-way, powered, portable speaker system. Capable of reproducing full
bandwidth sound at high levels it offers the additional utility of a 3 channel built-in mixer. The EON515 speaker is comprised
of a 15" Differential Drive woofer, a 1" neodymium high frequency compression driver coupled to a 100° H by 60° V
waveguide. Both components are driven by the discrete channels of a 450 W Crown Class-D integrated power amplifier. The input
section contains all crossover functions, protection, and audio mixer functionality.
The mixer offers XLR or 1/4-inch
TRS phone jack compatibility. Selectable input sensitivities allow a broad range of devices to be properly matched. A unique
mix/loop signal low router provides opportunities for daisy chaining or gigging with the built-in mixer only. Pre-engineered
system EQs allow for matching the settings to the actual source material. In the "cut" position maximum level can be achieved
for speech reproduction by reducing need to reinforce the lower frequencies. This is also a typical setting when using the
PA speaker system as a floor monitor, reducing low frequency build-up that occurs naturally when placed on a floor. The "flat"
setting is ideal for live music and the "boost" for reproducing low level pre-recorded music, delivering extra low and high
frequency energy. The signal present and limit lights indicate performance status. JBL included an additional switch that
kills the illuminated logo in theater applications.
JBL EON515 450 Watt 15" Powered PA Speaker Features:
- 450 W high-performance powered speaker system
- True portability weighing only 32.5 lb.
- Multiple handles with comfort grips for easy transport
- 15" Differential Drive low-frequency driver with neodymium magnet for low-distortion and light weight
- 1" throat diameter next generation JBL neodymium compression driver
- Efficient Crown Class-D amplifier technology
- Built-in 3 channel mixer
- 100° H x 60° V asymmetrical wave guide for uniform audience coverage
- Line level and direct microphone input capability
- Selectable pre-engineered EQ settings
- Unique mix/loop signal flow function for extended system application
- Easy "daisy-chain" connections for extending the system
- Integrated M10 suspension points for easy rigging
- Multi-angle enclosure for main or monitor applications
- Integrated 36 mm pole mount socket with stabilizing securing screw
- Highly designed composite enclosures for durability, lightweight, and acoustic performance
Get more power with less weight — order today!
JBL EON515 450 Watt 15" Powered PA Speaker Specifications:
- System type: Self-powered 15", two-way, bass-reflex design
- Frequency range (-10 dB): 39 Hz – 20 kHz
- Frequency response (±3 dB): 42 Hz – 18 kHz
- Coverage pattern: 100° H x 60° V nominal
- Directivity Index (DI): 9 dB
- Directivity Factor (Q): 8
- Crossover frequency: 2.2 kHz
- System power rating: 450 W continuous, 900 W peak
- LF power amp: 350 W continuous at driver impedance
- HF power amp: 100 W continuous at driver impedance
- Distortion: Less than .1% at rated power
- Maximum SPL: 129 dB
Signal indicators: - Limit: Red LED indicates input overload condition
- Signal: Green LED indicates signal present
- Mic/Line: Red LED indicator
Mic position: -Infinity to +40 dB
Line position: -Infinity to +4 dB (+20 dBu Max signal input)
Input gain (input 1 & 2): -Infinity to +4 dB (+20 dBu Max signal input)
Input impedance: 64 K Ohms (balanced), 32 K Ohms (unbalanced)
LF +3 dB Shelving Filter @ 200 Hz
HF +2.5 dB Shelving Filter @ 4 kHz
Low cut filter: Present high pass @ 120 Hz
LF driver: 1 x JBL 265F-1 380 mm (15 in) Differential Drive integrated woofer with dual 2" voice coils
HF driver: 1 x JBL 2414H 25.4 mm (1 in) neodymium compression driver
Input 3 connector: Balanced XLR 1/4 inch TRS combo jack with XLR loop through
Input 1 and 2 connectors: Balanced 1/4 inch TRS jack
Output (Loop/Mix switch): Balanced male XLR, +20 dBu (peak) o/p level in MIX position
XLR pin assignments: Pin 2 (+), Pin 3 (-), Pin 1 (GND)
Limiting/Protection: Dynamic limiter
Enclosure: PP impact copolymer, multi-purpose main and monitor orientation
Handles: One left/right side, one on top, with rubber grip
Suspension / Mounting: 36 mm pole socket with stabilizing screw, 4 x M10 suspension points, 1 x M10 pull-back point
Grille: Powder coated perforated steel with acoustically transparent black screen backing.
AC input: 120 – 240 V, 50/60 Hz
Dimensions (H x W x D): 27" x 17.3" x 14.4"
Net weight: 32.5 lb.
|
|
|
|
|
|
|
|
