Now you and your audience can enjoy the same sterling, high-definition sound!

The L1 Model I Single System/Dual Bass Package includes one Bose L1 Model I Cylindrical Radiator Speakers, one Bose L1 Model I Power Stands, and two Bose B1 Bass Modules.

Hear the same quality sound your audience hears with the award-winning L1 Model I system. Based on over 10 years of groundbreaking Bose research, this all-in-one amplification system features the unique Cylindrical Radiator loudspeaker. Its proprietary, vertical design helps fill the room with clear sound like no ordinary speaker can.

Wide, uniform coverage—throughout the room
The innovative Cylindrical Radiator loudspeaker has a line array of 24 small drivers mounted into a vertical enclosure for wide, horizontal sound coverage. In comparison to a conventional speaker, volume and tone diminish very slowly over distance.

The loudspeaker's wedge-shaped dispersion pattern sends very little audio up or down, preventing much of the room reverberation that can muddy your sound. In contrast to a conventional setup, an L1 system lets you, your fellow musicians and the audience hear the same sound. You don't need any other stage monitors, mixers or PA speakers. Your Bose L1 system replaces them all with one sleek, powerful setup.

Built-in amplifiers, mixer and ToneMatch® presets
The L1 Model I power stand includes built-in amplifiers to drive the loudspeaker and up to two B1 bass modules. It also has an integrated four-channel mixer with two XLR and two line-level inputs.

Onboard ToneMatch Presets-another Bose exclusive-let you quickly optimize the tone of up to 100 specific instruments and microphones, at the touch of a button. For more inputs and a suite of effects and tone-shaping tools, add the optional T1 ToneMatch audio engine.

L1 Model I Cylindrical Radiator Speaker
The L1 Model I Cylindrical Radiator Speaker is an integral component of the from Bose L1 Model I system. The unique Cylindrical Radiator loudspeaker comes in two sections and has a line array of 24 small drivers mounted into a vertical speaker enclosure for wide, horizontal sound coverage. This proprietary design helps fill the room with clear sound like no ordinary speaker can. In comparison to a conventional audio speaker, volume and tone diminish very slowly over distance.

The loudspeaker's wedge-shaped dispersion pattern sends little sound to the floors, upper walls and ceilings, minimizing room reverberation and increasing clarity. In contrast to a conventional setup, the Bose L1 system lets you, your fellow musicians and the audience hear the same sound. You don't need any other stage monitors, mixers or PA speakers. The L1 system replaces them all with one sleek, powerful setup.

The L1 Cylindrical Radiator loudspeaker features a two-piece, interlocking design for quick and easy transport, setup and breakdown. Each section of loudspeaker is 43 1/2" (1.1 m) high. It includes an interlocking bayonet with center and bottom latches.

L1 Model I Power Stand
As well as being the mechanical support for the Bose L1 Cylindrical Radiator loudspeaker, the Bose L1 Model I Power Stand houses the amplifier and mixer for the 4-channel system L1 system. This innovative system eliminates the need for conventional monitors, mixers, and PA speakers. It is the ultimate in fidelity and is extremely lightweight and portable. Features of the PS1 Power stand include:

Integrated power amplifiers:
Provide clean, precise amplification for Bose L1 Model I loudspeaker and up to two B1 bass modules. Musicians can play soft or loud with confidence the system will accurately amplify their performance.

Four-channel mixer:
Primary mic/line input channels 1 and 2 accept XLR and 1/4" TRS connections; they feature ultra-low noise preamps, two-stage clip lights, trim controls and XLR line-out channels. Secondary input channels 3 and 4 accept 1/4" unbalanced line-level sources like keyboards, sequencers, mixers and MP3 players.

ToneMatch presets:
Proprietary ToneMatch presets optimize L1 system to match intended natural sound of specific instruments and microphones on channels I and 2. Select presets independently for these channels using pushbutton controls.

Channel inserts/effects loops:
Connect channels 1 and 2 to external effects and processors via 1/4" TRS line input/output connections. Use a stereo plug to connect the send and return signals with one cord.

Bass module out:
Delivers amplified bass output signal to one or two B1 bass modules. The Bose L1 system automatically adjusts equalization appropriately when bass modules are connected.

Bass line out:
Post-DSP bass signal output. Accepts 1/4" TRS phone cable. Use to connect PackLite amplifier with up to two additional bass modules. Can also be used to connect powered subwoofer or additional amplification system.

Digital data out:
Send digital mix of channels 1 and 2 to external recording gear at 48KHz sample rate.

Digital data in:
Update product software and ToneMatch presets via this digital input connector.

R1 remote input:
Seven-pin connection works with R1 remote control.

B1 Bass Module
The Bose B1 Bass Module works seamlessly with the L1 Model I PA System to deliver the low-frequency impact you want through 2 high-output, high-excursion 6-1/2" drivers. It produces deep, strong bass for keyboards, kick drum, bass guitar, and other instruments that play in the baritone/bass range. Light and compact, strong bass is yours without the bulk and weight of traditional subwoofers. Connects to the power stand with a single cable.

Bose L1 Model 1 Single System/Dual Bass Package Features:

• General
• Projects clean, detailed sound evenly across the stage and throughout an audience of up to several hundred, with little change in tone or volume
• Produces smooth, consistent tone, whether you're in front of the speaker or off to the side
• Reduces much unwanted room reverberation
• Eliminates conventional monitors, mixers and PA
• Sets up and breaks down quickly
• Fits easily into a car trunk
  
  L1 Model I Cylindrical Radiator Speaker
• Cylindrical Radiator and Articulated Array technologies
• Two-piece, interlocking design
• Eliminates the need for conventional monitors and PA speakers
• Musicians and the audience hear the same sound
• L1 Model I Cylindrical Radiator box includes: Loudspeaker top and bottom, Carrying bags
  
  L1 Model I Power Stand
• 4-channel mixer
• 250 Watts to upper section & 250 Watts to lower section of the L1 cylindrical speaker column (comes in two sections and is sold separately)
• Two combination XLR-1/4" inputs (channels 1 and 2)
• Two 1/4" line inputs (3 and 4)
• Two XLR outputs (1 and 2)
• Two TRS inserts/effects loops (1 and 2)
• Neutrik NL4 bass module output
• 1/4" bass line output
• Digital data in
• Digital data out
• R1 remote in
• Power stand box includes: Power stand, Power cord, R1 remote and cable, Spare fuse, Protective plug, and Carrying bag
  
  R1 Remote
• Tone controls (channels 1 and 2) - High, mid and low tone controls, each with -12 dB cut to +12 dB boost
• Level controls and signal/overload LEDs (1 and 2) - Adjust input signal levels. Green/red LEDs show signal status and help you set proper gain levels
• Master level - Adjust volume of all four input channels simultaneously
  
  B1 Bass Module
• Bass support for L1 Cylindrical Radiator loudspeaker
• 2 high-output, high-excursion 6-1/2" drivers
• Light and compact
• Connects to the Power Stand with a single cable
• System power: 250W

Order today with the protection of our 45-day lowest price and total satisfaction guarantees!

Bose L1 Model 1 Single System/Dual Bass Package Specifications:

• L1 Model I Cylindrical Radiator Speaker top
• Dimensions: 43''H x 3 1/2''W x 4''D (1.1 m x 8.9 cm x 10.5 cm)
• Weight: 14.5 lbs (6 kg)
  
  L1 Model I Cylindrical Radiator Speaker bottom
• Dimensions: 43''H x 3 1/2''W x 4''D (1.1 m x 8.9 cm x 10.5 cm)
• Weight: 16.0 lbs (7 kg)
  
  L1 Model I Power Stand:
• Dimensions: 26"W x 5"H x 26"D (12.7 x 66 x 66 cm)
• Weight: 35 lbs. (16kg)
  
  R1 remote
• Dimensions: 1-3/5"H x 2 4/5"W x 5 3/5"D (4.0 cm x 7.1 cm x 14.1 cm)
• Weight: 0.6 lbs (0.27 kg)
  
  B1 Bass Module
• Dimensions: 10-3/10"W x 15-3/10"H x 18"D (38.0 x 25.0 x 45.7 cm)
• Weight: 28 lbs. (13 kg)